Safety Pass Alliance  ·  National safety passport schemes since 1999 Check a passportProvider loginContact
Quarries

Quarry passport test: what it covers, with practice questions

What the MPQC/SPA Quarry Safety Passport assessment covers, how it works and 15 practice questions with answers to help you prepare.

Safety Pass Alliance Updated 6 October 2026 6 min read
On this page
Short answer

The MPQC/SPA Quarry Safety Passport is assessed with a short multiple-choice examination at the end of the course. The questions test what is taught on the two days: health and safety responsibilities, danger areas such as blasting, crushers, conveyors and edges, mobile plant, working at height, isolation and permits, excavations and confined spaces, health risks and environmental protection. The best preparation is to attend both days attentively and ask questions. The practice questions below cover the same topics.

How the assessment works

The quarry passport is not a test you book separately. It is part of the course, sat on the day under your trainer's supervision, whether you attend in a classroom or live online. It is a short multiple-choice examination: each question has several possible answers and you choose the correct one.

The questions are drawn from the course content, so everything you need is covered in the training. Trainers do not expect you to know quarry regulations in detail; they expect you to understand the hazards, the controls and your own responsibilities.

What the test covers

Topic What you should understand
Health and safety responsibilities Duties of employers and employees, why rules exist, reporting accidents and near misses
Danger areas Blasting precautions, unprotected edges, crushers, conveyors, excavations, tips, lagoons, bitumen and cement
Mobile plant Reversing vehicles, blind spots, safe pedestrian routes, crane operation and slinging
Access and working at height Ladders, scaffold towers, roofs, cherry pickers, harnesses
Hazardous operations Maintenance and breakdown work, isolation and lock-off, permits to work
Excavations and confined spaces Collapse, access, ventilation, inspection, emergency procedures
Health risks Dust and silica, noise, vibration, dehydration, PPE
Environment Spillage, groundwater, dust and noise, waste, ecology and archaeology

15 practice questions

These questions are written by the SPA passport team to help you prepare. They are not taken from the real assessment, but they test the same knowledge. Answers are below.

1. Before carrying out maintenance on a conveyor, what must happen first? A. Guards are left in place while you work around them B. The conveyor is isolated and locked off so it cannot start C. The conveyor is slowed to its lowest speed D. A colleague stands by the start button

2. Where is the most dangerous place to stand when a dump truck is reversing? A. Directly behind the vehicle B. In a designated pedestrian area C. Inside a site cabin D. In the driver's line of sight at the front

3. Which health risk is most associated with dust from cutting and crushing stone? A. Noise-induced hearing loss B. Hand-arm vibration syndrome C. Dermatitis D. Silicosis and other lung disease

4. What should you do if you hear the warning signal before a blast? A. Shelter under plant near the face B. Go to the blast area to watch C. Carry on working if you are behind a vehicle D. Move to the designated safe area and stay there until the all-clear

5. What is the main purpose of a permit to work? A. To replace the risk assessment B. To record who was on site C. To control higher-risk work by setting out the hazards, precautions and authorisation before work starts D. To show the job has been invoiced

6. Why are edges of faces, benches and stockpiles dangerous? A. They are only dangerous at night B. They are not dangerous if you wear a hard hat C. They are slippery only in winter D. People and vehicles can fall from them, and edges can collapse

7. Lagoons and silt ponds on quarry sites are dangerous because: A. Their surface can look solid but behave like quicksand, and people can drown B. They only affect vehicles C. They are always fenced, so there is no risk D. They contain chemicals only

8. What should you check before entering a confined space? A. That the entry is wide enough B. That someone knows you have gone in C. That you have a torch D. That a safe system of work and permit are in place, the atmosphere has been tested and rescue arrangements exist

9. Which of these is a sign of dehydration when working in hot conditions? A. Headache, dizziness and dark urine B. Increased appetite C. Feeling cold D. Better concentration

10. A near miss is: A. An event that could have caused harm but did not B. Not worth reporting C. Damage to equipment only D. An accident causing a minor injury

11. What is the safest way to deal with a blocked crusher? A. Wait for it to clear itself B. Clear it by hand while it runs slowly C. Follow the site's procedure, which will include isolation and lock-off and may need a permit D. Use a bar while standing on the edge of the feed

12. When working at height from a cherry picker, you should: A. Move the machine while people are working below without warning B. Wear a harness clipped to the designated anchor point if required by the site rules C. Climb onto the guardrail for extra height D. Lean over the guardrail to reach further

13. Why must fuel and oil be stored and handled carefully on quarry sites? A. It is not a legal requirement B. Fuel cannot ignite outdoors C. To reduce costs only D. Spills can contaminate groundwater and watercourses as well as cause fire

14. What is the first thing you should do if you discover an accident? A. Make sure the area is safe, raise the alarm and get help B. Carry on and report it later C. Move the injured person immediately D. Take photographs

15. Hearing protection should be worn: A. Where the site signs or risk assessment say it is required B. Only indoors C. Only by machine operators D. Only when the noise is painful

Answers

1 B. 2 A. 3 D. 4 D. 5 C. 6 D. 7 A. 8 D. 9 A. 10 A. 11 C. 12 B. 13 D. 14 A. 15 A.

Tips for passing

  • Attend both days fully. The assessment covers what is taught. Missing part of the course is the most common reason people struggle.
  • Ask questions. If something does not make sense, ask your trainer. They want you to pass.
  • Think about the safest answer. Assessment questions reward the answer that controls the hazard, not the quickest way to get the job done.
  • Read every option. Several answers can look plausible. Pick the one that fully controls the risk.
  • Relate it to real sites. If you have quarry experience, connect what you hear to sites you know.

What happens if you do not pass?

Ask your provider about their resit arrangements before you book. Most can arrange a resit or support you to retake the assessment.

Frequently asked questions

Is the quarry passport test hard?

It is designed for people new to the industry as well as experienced workers. If you attend both days and engage with the training, you should be well prepared.

Is the quarry passport test multiple choice?

Yes. It is a short multiple-choice examination at the end of the course.

Can I take the test online?

Yes, if you attend a live online course. The assessment is sat remotely under the trainer's supervision.

Are these the real exam questions?

No. They are practice questions written to cover the same topics. The real assessment is set by the scheme and sat on the course.

Written by the SPA passport teamSafety Pass Alliance has designed and run national safety passport schemes since 1999, working with industry bodies and more than 70 accredited training providers. Facts in this article were checked against official sources on 6 October 2026.

Find a Mineral Products course

Book directly with an accredited provider. Dates in most regions and live online.