On this page
There is no single water industry passport. Most work for UK water companies needs EUSR registrations: SHEA Water for general site safety and National Water Hygiene, the "blue card", for anyone on clean water sites or the clean water network. Some companies add their own passport on top, such as the Thames Water Passport. Construction work may also need a CSCS card, and road work a street works card. Ask the water company or principal contractor for their entry rules before you book anything.
What water companies usually ask for
| Card or registration | What it covers | Who runs it |
|---|---|---|
| National Water Hygiene ("blue card") | Preventing contamination of drinking water. Required by all UK water companies for clean water sites and the clean water network | EUSR |
| SHEA Water | General health, safety and environmental awareness on water industry operational sites | EUSR |
| Company passports, such as the Thames Water Passport | The company's own safety expectations, hazards and site rules | The water company |
| CSCS card | Construction work, including capital projects on water sites | CSCS, or EUSR for its CSCS-logoed utilities cards |
| Task-specific training | Confined spaces, street works, plant and similar, depending on the job | Various |
The exact mix depends on the company, the site and the work. Treat this as a starting point and confirm the requirement in writing.
National Water Hygiene: the blue card
This is the one almost everyone on clean water work needs. EUSR says all UK water companies require it for people entering clean water sites or working on the clean water network. The training covers how water carries disease, how contamination happens and how to prevent it. There is a health declaration, and anyone who has had certain illnesses in the last 12 months needs medical confirmation before registration. The registration lasts three years and is renewed by retaking the training and assessment.
SHEA Water
SHEA Water is EUSR's one-day safety awareness course for people at all levels on water industry operational sites. It has eight modules, each with a short multiple-choice assessment, and the registration lasts three years. Renewal is a full day, or a half day if your registration is still current. SHEA is also required for EUSR's CSCS-logoed utilities cards. Our guide to what an EUSR card is explains the scheme in more detail.
Company passports: the Thames Water example
Some water companies run their own passport as well. Thames Water introduced its own health and safety passport so that every contractor completes a safety induction before starting work, and now records it through a workforce competence platform. Training providers advertise the Thames Water Passport as a short instructor-led course, with a card valid for three years, and workers usually need to be registered on that platform by their employer before they can book.
Requirements like these change, so check the current rules with Thames Water's supply chain team or the principal contractor you are working for. Other water companies may have similar company-specific inductions.
Working next to water rather than for a water company
Not all waterside work is for a water company. Contractors working near rivers, canals, reservoirs, docks or lakes face the same core risks: falling in, cold water, lone working and access. The SPA Water passport pairs the SPA Core Day with a day on working next to water, lone working, hazardous substances, working at height and excavations. It is available on request rather than on public course dates.
It is not a replacement for SHEA Water or National Water Hygiene where a water company asks for those. It suits employers who want a recognised waterside safety standard for their own teams or contractors.
Putting it together: a checklist
- Ask the client or principal contractor which cards and registrations they require, and get the answer in writing.
- If the work touches clean water, book National Water Hygiene first, and allow time for the health declaration.
- Add SHEA Water if the client asks for it, or if you need an EUSR CSCS card.
- Complete any company passport the client runs.
- Add task training for the job itself, such as confined spaces or street works.
- Track every expiry date. Most of these last three years, but they rarely line up.
For employers and water industry clients
If you set entry rules for waterside or water industry work and want one consistent standard for contractors, an industry passport can help. SPA builds passports with the industry bodies and employers that need them, and can adapt an existing scheme. See how an industry gets its own safety passport, or talk to us about your sector.
Frequently asked questions
Do I need a water hygiene card to work for a water company?
For clean water sites and the clean water network, yes. EUSR says all UK water companies require National Water Hygiene registration for that work.
What is the Thames Water Passport?
Thames Water's own health and safety passport for people working on its sites and assets. Check the current requirement with Thames Water or your principal contractor before booking.
Is SHEA Water the same as water hygiene?
No. SHEA Water is general health, safety and environmental awareness. National Water Hygiene covers preventing contamination of drinking water. Many people need both.
What is the SPA Water passport?
An SPA passport for work next to and around water, combining the SPA Core Day with a waterside safety day. It is available on request and does not replace a water company's own requirements.


