On this page
Choose the passport your sites ask for. CCNSG, run by the ECITB, is the standard for engineering construction: refineries, power stations, chemical and process plants. SPA passports are the standard on petrol forecourts, in food and drink manufacturing and, through the MPQC/SPA scheme, in quarries. Both are two-day courses valid for three years with a one-day renewal, but they are not interchangeable, and a site that names one will not usually accept the other.
The short version
| SPA safety passport | CCNSG Safety Passport | |
|---|---|---|
| Scheme owner | Safety Pass Alliance | ECITB (Engineering Construction Industry Training Board) |
| Where it is used | Petrol forecourts, food and drink manufacturing, quarries and mineral products, plus other SPA sectors | Engineering construction and process industries: refineries, power generation, chemical, oil and gas sites |
| Course structure | Core Day plus an industry-written sector day | Two-day national safety course |
| Card valid for | 3 years (Core Construction 5 years) | 3 years |
| Renewal | One-day refresher, in the six months before expiry | One-day renewal course |
| Industry content | Each sector day is written with that industry, such as Fuels Industry UK and Cogent Skills for forecourts | One national syllabus across engineering construction |
| Multiple sectors on one card | Yes, each with its own expiry date | Not applicable |
Why two schemes exist
Both schemes solve the same problem. Contractors move between sites run by different clients, and each client needs proof that the people arriving have basic health and safety training. A shared passport means the contractor trains once and every client in the scheme accepts the card.
The difference is the industry each scheme grew up in. CCNSG stands for Client/Contractor National Safety Group, the steering group of major clients and contractors in engineering construction that controls the scheme. The ECITB administers it. Its syllabus is built around large process and power sites: permits, isolations, confined spaces and the hazards of major plant.
SPA took a different approach. Its passports pair a Core Day, common to most sectors, with a sector day written for a specific industry. The forecourt sector day covers fuel properties, DSEAR, hazardous zones, delivery hazards, vapour recovery and permits on a live petrol station. The food and drink sector day covers food protection, contamination and hygiene alongside environmental protection. The quarry day, developed with MPQC, covers blasting, mobile plant, crushers, conveyors and excavations.
Which one should you book?
Book the one the site names. If you are a contractor, ask the site operator or main contractor which passport they accept before you pay for anything.
As a rule of thumb:
- Working on petrol forecourts, fuel storage or tanker delivery areas: the SPA Petrol Retail passport.
- Working in food or drink factories: the SPA Food and Drink passport.
- Working in quarries, asphalt or concrete plants: the MPQC/SPA Quarry Safety Passport.
- Working at refineries, power stations, chemical plants or other engineering construction sites: the CCNSG Safety Passport from the ECITB.
- Labouring on a building site: a CSCS Labourer card. The SPA Core Construction course is one of the routes CSCS accepts towards it.
Some contractors need both. An electrical firm that services forecourt equipment and also works at a refinery will typically need SPA Petrol Retail for one and CCNSG for the other.
Does a CCNSG passport count towards SPA, or the other way round?
Not automatically. Each scheme sets its own rules on prior learning.
SPA runs a reciprocal policy: if you hold a nationally recognised health and safety qualification covering at least 80 per cent of the Core Day material, you can apply for exemption from the Core Day when attending a two-day SPA course, and attend the sector day only. The qualifications accepted are listed in the SPA Reciprocal Policy, and other courses can be considered if the relevant sector approves them on sight of the full syllabus. Exemptions are not accepted on the MPQC/SPA quarry course.
For CCNSG's own rules on recognising other training, check with the ECITB or your CCNSG provider.
How the courses compare in practice
Length. Both initial courses run over two days. Both renewals are one day.
Delivery. Most SPA courses, including Petrol Retail, Food and Drink and Mineral Products, can be taken in a classroom or live online with a trainer. SPA Core Construction is classroom only. CCNSG providers also run classroom and remote courses; check the delivery method with the provider.
Assessment. SPA courses have an assessment paper for each module. The Core Day pass mark is 80 per cent. CCNSG has its own assessment set by the ECITB.
Booking. Both schemes are delivered through accredited training providers, who set their own prices and dates. Upcoming SPA dates from every accredited provider are listed on the SPA course finder.
Renewal rules side by side
Both cards last three years, but the renewal detail matters.
SPA passports can be renewed with a one-day refresher only in the six months before expiry. Renew in that window and you keep your original anniversary date, so renewing early costs nothing. Miss it and you sit the full two-day course again: there has been no grace period after expiry since 31 July 2020. Our renewal guide covers the detail.
For CCNSG, the card also lasts three years and is renewed with a one-day course. Check the current timing rules with the ECITB before your card runs out.
Which is more widely recognised?
Each is the recognised standard in its own industries, and neither is a general-purpose card. The Petrol Retail passport has been the forecourt standard since the first courses ran in October 2000, and more than 20,000 forecourt contractors have held one. CCNSG is equally established across engineering construction.
The useful question is not which card is better, but which card your work requires. For most contractors the answer is one; for those who cross industries, it may be both.
What each course covers
The two schemes cover similar ground on day one and diverge sharply after that.
| Topic area | SPA (Core Day plus sector day) | CCNSG |
|---|---|---|
| Health and safety law and responsibilities | Core Day: Organising for safety | Yes |
| Workplace hazards, working at height, confined spaces | Core Day: The workplace | Yes |
| Work equipment and workplace transport | Core Day: Tools, plant and machinery | Yes |
| Health risks: substances, noise, manual handling, stress | Core Day: Health | Yes |
| Emergency procedures and first aid arrangements | Core Day: Procedures | Yes |
| Environmental protection | Core Day: The environment | Yes |
| Industry-specific hazards | Written per sector: forecourt fuel hazards and DSEAR zones, food contamination and hygiene, quarry blasting and mobile plant | Engineering construction and process plant hazards |
| Permits to work | Covered in sector days where relevant, such as controlling work on a forecourt | Yes |
The SPA model means a contractor who moves from forecourts to food factories only needs to add a sector day, because the Core Day is shared. Each sector then appears on the same card with its own expiry date.
For employers: which passport should you specify?
If you run sites or manage contractors, specify the passport that matches the hazards on your sites and the scheme your supply chain already holds.
- Specify SPA Petrol Retail if your sites are forecourts, fuel depots or other locations where contractors work around petrol and diesel. The content was developed with the fuels industry and covers hazards that a general course does not.
- Specify SPA Food and Drink for production and processing sites where contractors can contaminate product as well as injure themselves or others.
- Specify the MPQC/SPA passport for quarries and mineral processing.
- Specify CCNSG for engineering construction and process plant work, where your supply chain is likely to hold it already.
You can accept more than one scheme. HSE encourages organisations to recognise different passport schemes where they are confident the training covers the awareness the work needs. Whatever you specify, write it into your contractor conditions and check the card at the gate. Our employer guide sets out how to introduce a requirement.
Booking and cost
Both schemes are sold by accredited providers, not by the scheme owners, so prices vary between providers. For SPA courses, the provider's price normally includes registration and the card. See how much a safety passport costs for what to compare.
Frequently asked questions
Can I use my CCNSG passport on a petrol forecourt?
Usually not. Forecourt operators in the SPA scheme ask for the SPA Petrol Retail passport, which covers forecourt-specific hazards such as fuel properties, hazardous zones and delivery hazards. Ask the site operator if you are unsure.
Is SPA or CCNSG harder to pass?
Both are awareness courses designed for people new to the industry as well as experienced workers. Each has a written assessment. SPA's Core Day pass mark is 80 per cent.
Are both passports valid for three years?
Yes. Both cards are valid for three years and renewed with a one-day course. SPA's Core Construction passport follows the five-year CSCS cycle.
Can I hold SPA and CCNSG at the same time?
Yes. Many contractors hold both because they work across forecourts and engineering construction sites.


