Safety Pass Alliance  ·  National safety passport schemes since 1999 Check a passportProvider loginContact
Safety passports

What is a safety passport? The UK schemes explained

A safety passport is a photocard proving you have completed recognised health and safety training for an industry. How UK schemes compare, who needs one and how to get it.

Safety Pass Alliance Updated 6 October 2026 8 min read
On this page
Short answer

A safety passport is a photocard that proves the holder has completed a recognised course in basic health and safety for a particular industry. Site operators use passports as a condition of entry for contractors, so everyone on site starts from the same baseline. In the UK the main schemes are SPA (forecourts, food and drink, quarries), CCNSG (engineering construction), CSCS (building construction) and EUSR (utilities). Most passports involve one or two days of training and last three to five years.

How a safety passport works

Every passport scheme follows the same basic pattern. A scheme owner writes a standard course, often with an industry body. Accredited training providers deliver it. Delegates sit an assessment, and those who pass receive a card showing their name, photograph, a unique ID number, what they are trained in and when it expires.

The site operator then does one simple thing: it asks to see the card before work starts. That single rule changes how a site runs. Instead of checking a folder of certificates from dozens of contractors, the gatehouse checks one card. Instead of teaching the basics in every site induction, the induction can concentrate on what is specific to that site.

Passports grew up in industries where contractors move between many sites run by different companies. A forecourt engineer might work at a dozen petrol stations for four different fuel brands in a month. Without a shared standard, each brand would need to train and assess that engineer separately. With one, the engineer trains once and every brand in the scheme recognises the card.

What a passport proves, and what it does not

A passport proves that the holder has attended a recognised course and passed its assessment within the validity period. It shows a baseline of health and safety awareness.

It does not prove that the holder is competent to do a particular job. The Health and Safety Executive (HSE) is clear on this point. Its guidance on health and safety passport schemes describes passports as a useful way for employers to check that someone has received basic health and safety awareness training, but states that a passport is not an assurance of competence, not a substitute for job or site-specific information, and not a substitute for effective management and supervision on site.

In practice, sites combine the passport with three other things: evidence of trade competence (qualifications, tickets or experience), a site induction covering local hazards and rules, and supervision while the work is done.

The main UK safety passport schemes compared

Scheme Run by Main industries Typical course Card valid for
SPA safety passports Safety Pass Alliance Petrol retail forecourts, food and drink manufacturing, quarries and mineral products Core Day plus a sector day (2 days), 1-day renewal 3 years (5 for Core Construction)
CCNSG Safety Passport ECITB Engineering construction: refineries, power stations, chemical plants 2 days, 1-day renewal 3 years
CSCS cards CSCS Building and civil construction sites Depends on card type; labourers need a Level 1 course or approved alternative plus the CITB test Labourer card: 2 years first time, then 5
EUSR registered training Energy & Utility Skills Gas, power and water utilities Safety, Health and Environmental Awareness (SHEA) courses Usually 3 years
MPQC/SPA Quarry Safety Passport MPQC with SPA Quarries, asphalt, concrete and mineral processing MPQC core day plus quarry day, 1-day refresher 3 years

The right passport is the one your sites ask for. The schemes are not interchangeable: a CCNSG card will not usually get you onto a forecourt where the operator requires the SPA Petrol Retail passport, and an SPA card does not replace the CITB test for a CSCS card.

Who needs a safety passport?

You need a passport when the site you are working on requires one. That requirement comes from the site operator or the client, not from a single law. Common examples:

  • Forecourt contractors. Engineers, builders, electricians, cleaners and maintenance teams working on, in or around petrol filling stations are expected to hold the SPA Petrol Retail passport.
  • Food and drink contractors. Many manufacturers ask contractors and agency staff for the SPA Food and Drink passport before they enter production areas.
  • Quarry contractors. Operators across the mineral products industry ask for the MPQC/SPA Quarry Safety Passport.
  • Construction labourers. The SPA Core Construction course is one of the routes CSCS accepts for the green Labourer card.

If you are not sure, ask the site or the main contractor which passport they accept before you book anything.

Why employers use passport schemes

For site operators, a passport requirement solves three problems at once.

A common baseline. Every contractor arrives with the same core training, whoever employs them. That matters most on sites with a large and changing contractor workforce.

Faster entry. Checking a card takes seconds. Inductions get shorter because the basics are already covered, which cuts the hours contractors spend in site offices before they can start work.

Evidence. A passport gives the operator a record that each person on site has received recognised training, which supports the duty under the Health and Safety at Work etc. Act 1974 to protect people who are not its employees.

The results can be significant. Leicester City Council reported a 32 per cent fall in accident rates over the three years after it introduced an SPA passport for its housing maintenance teams.

How to get a safety passport

  1. Find out which passport your sites require. Ask the site operator, main contractor or your employer.
  2. Book with an accredited provider. Only approved providers can deliver scheme courses and register delegates. For SPA passports, the course finder lists upcoming dates from every accredited provider, in the classroom and live online.
  3. Attend and pass the assessment. SPA courses have a short assessment paper for each module. The Core Day pass mark is 80 per cent.
  4. Receive your card. SPA issues passports within ten working days of receiving the paperwork from the provider.
  5. Renew before it expires. Most passports are renewed with a shorter refresher course. For SPA passports the renewal must fall in the six months before expiry, and there is no grace period afterwards.

What is on an SPA passport card?

An SPA passport carries the holder's photograph and name, a personal passport ID, each sector held and the expiry date for each. The card is printed with dye embedded into it and sealed with a holocote finish, so the details cannot be changed without visible damage. Further training, such as SPA modules, can be recorded on the same passport.

Passport, induction and competence: how they fit together

Sites that run contractor control well treat the passport as one of four layers, each answering a different question.

Layer Question it answers Example
Safety passport Has this person had recognised health and safety awareness training for this industry? SPA Petrol Retail passport
Competence evidence Can this person do this particular job safely? Trade qualification, equipment ticket, experience records
Site induction Does this person know this site's hazards, rules and emergency arrangements? Gatehouse induction, site rules briefing
Supervision and permits Is this job being controlled while it happens? Permit to work, method statement, supervisor checks

A passport cannot do the job of the other three, and they cannot easily do the job of the passport. Without a common passport, the induction ends up teaching the basics to every new contractor, which is slow and inconsistent. With one, the induction can be short and specific.

Common mistakes with safety passports

Booking the wrong scheme. The most expensive mistake is paying for a passport your sites do not recognise. Always confirm which passport the site operator accepts before you book.

Letting it lapse. Most schemes give you a cheaper, shorter renewal if you renew on time. For SPA passports, the renewal must fall in the six months before expiry. Miss it and you sit the full course again.

Treating the card as proof of competence. A passport shows awareness training. Employers still need to check that people are competent for the task and give them site-specific information.

Not checking cards properly. A quick glance at a card in a lanyard is not a check. Look at the photograph, the sector and the expiry date, and verify the card if anything looks wrong.

Frequently asked questions

Is a safety passport a legal requirement?

No single law requires a safety passport. The requirement comes from the site operator or client, who uses it to meet their legal duties towards contractors. In practice, if a site requires a passport and you do not have one, you will not be allowed to work there.

Is a safety passport the same as a CSCS card?

No. CSCS cards cover building construction and show both health and safety knowledge and occupational competence. A safety passport, such as an SPA or CCNSG passport, shows health and safety awareness for a particular industry. Some passport courses, including SPA Core Construction, can be used towards a CSCS Labourer card.

How long does a safety passport take to get?

Most passports involve one or two days of training. SPA issues the card within ten working days of receiving the paperwork from your training provider.

Does HSE approve safety passport schemes?

HSE does not normally approve or endorse individual passport schemes. It encourages organisations to recognise different schemes where they are confident the training matches the level of awareness the work requires.

Can one safety passport cover several industries?

An SPA passport can show more than one sector. A contractor who works on forecourts and in food factories can hold both sectors on the same card, each with its own expiry date.

Written by the SPA passport teamSafety Pass Alliance has designed and run national safety passport schemes since 1999, working with industry bodies and more than 70 accredited training providers. Facts in this article were checked against official sources on 6 October 2026.

Find a course

Book directly with an accredited provider. Dates in most regions and live online.