On this page
A safety passport covers general health and safety awareness for an industry, so your contractor induction does not need to teach the basics again. What it must still cover is everything specific to your site: the layout and traffic routes, local hazards, site rules, permit arrangements, emergency procedures, welfare and who to report to. A good induction for a passport holder is short, specific and checked, often 15 to 30 minutes instead of hours.
Why passports and inductions work together
Without a passport requirement, inductions try to do two jobs at once: teach general health and safety and explain the site. That makes them long, repetitive for experienced contractors and inconsistent between sites.
A passport takes the first job away. Every holder has already covered the basics, assessed to the same standard. The induction can then concentrate on what only you can tell them: how your site works.
HSE makes the same distinction. Its guidance on passport schemes says a passport is not a substitute for giving job or site-specific information. The passport and the induction answer different questions, and you need both.
What an SPA passport already covers
Every SPA passport includes the six Core Day modules:
| Module | Covers |
|---|---|
| Organising for safety | Legal responsibilities of employers and employees, enforcing authorities, vulnerable workers, hazard identification and control |
| The workplace | Safe places of work, safe behaviour, hidden services, working at height, asbestos, confined spaces, permits to work |
| Tools, plant and machinery | Powered and non-powered equipment, forms of energy, workplace transport |
| Health | Hazardous substances, musculoskeletal problems, manual handling, noise and stress |
| Procedures | The importance of procedures, emergency procedures and first aid arrangements |
| The environment | Environmental requirements, storage and marking, waste, emergency planning |
On top of that, the sector day covers the industry's specific hazards. A Petrol Retail holder has covered fuel properties, DSEAR zones, delivery hazards and permits on forecourts. A Food and Drink holder has covered food protection and contamination. A Mineral Products holder has covered blasting, mobile plant, crushers and conveyors.
What your induction must still include
- Site layout. Entrances, exits, pedestrian routes, vehicle routes, restricted and hazardous areas.
- Local hazards. What is specific to this site today: live systems, ongoing work, hazardous zones, deliveries, members of the public.
- Site rules. PPE requirements, phones, smoking and vaping, hygiene rules, photography, speed limits.
- Permit arrangements. Which jobs need permits, who issues them and how they are handed back.
- Emergency procedures. Alarms, assembly points, emergency stops, fire equipment, first aid and how to raise the alarm.
- Reporting. Who the contractor reports to, how to report accidents, near misses and concerns.
- Welfare. Toilets, washing facilities, rest areas and drinking water.
- The job itself. Confirmation of the work, the agreed method statement and any controls.
How to keep inductions short and effective
- Check the passport first. If the contractor does not hold the passport your site requires, deal with that before the induction.
- Use a standard format. A checklist or short presentation keeps every induction consistent.
- Show, don't just tell. A walk round the work area, pointing out hazards and emergency equipment, is worth more than a slide.
- Check understanding. Ask a few questions at the end. It takes a minute and shows whether the key points landed.
- Record it. Who was inducted, when, by whom, and their passport details.
- Refresh when things change. Repeat visitors need a refresher if the site layout, hazards or rules have changed.
An example induction outline for passport holders
A focused induction for a contractor holding the right passport might look like this:
| Time | Item |
|---|---|
| 2 minutes | Passport check: photo, sector, expiry date. Record the passport ID |
| 5 minutes | Site layout: entrances, routes, restricted and hazardous areas |
| 5 minutes | Site rules: PPE, phones, hygiene, smoking and vaping, photography |
| 5 minutes | Emergency procedures: alarms, assembly point, emergency stops, first aid |
| 5 minutes | The job: method statement, permits, isolations, who to report to |
| 5 minutes | Walk round the work area, pointing out hazards and emergency equipment |
| 3 minutes | Questions and a quick check of understanding. Sign the record |
Adjust the times to your site, but keep the principle: no time spent re-teaching what the passport already covers, and more time spent on what only your site can explain.
Inductions for repeat contractors
Contractors who visit regularly do not need the full induction every time, but they do need to know what has changed. Many sites use a short daily briefing for repeat visitors and repeat the full induction at set intervals, for example annually, or whenever the site changes in a way that affects contractors. Re-check the passport at every visit: it may have expired since the last one.
Frequently asked questions
Does a safety passport replace a site induction?
No. A passport covers general awareness for the industry. A site induction covers your site's specific hazards, rules and emergency arrangements. You need both.
How long should a contractor induction take?
For passport holders, inductions can usually be kept to 15 to 30 minutes, depending on the site and the work. Higher-risk sites and jobs may need longer.
Should I record contractor inductions?
Yes. Record who was inducted, when, by whom and their passport details. It helps you show your controls work and track renewals.
Can I do contractor inductions online?
Some sites send pre-arrival information or online modules, which can shorten the on-site induction. A walk-round of the actual work area is still valuable.


