On this page
Contractor management is the system a business uses to make sure contractors work safely on its premises or on its behalf. It covers planning the work, choosing competent contractors, agreeing how risks will be controlled, managing and supervising the work, and reviewing it afterwards. In the UK, the client and the contractor both have legal duties, so neither can hand safety entirely to the other. Safety passports are one of the main tools sites use to check that every contractor arrives with a baseline of health and safety training.
Why contractor management matters
Contractors often do the most hazardous work on a site: maintenance, repairs, installations, cleaning, demolition and work on live systems. They may be unfamiliar with the site, its hazards and its rules, and they may be working alongside your own staff, the public or each other. When things go wrong, the consequences fall on everyone involved, and investigations routinely look at how the client selected and controlled the contractor.
Good contractor management reduces that risk. It also saves time: when the standard for contractors is clear, the right people turn up with the right training and paperwork, and work starts sooner.
Your legal duties as a client
Several pieces of UK law apply when you use contractors.
Health and Safety at Work etc. Act 1974. Section 3 requires employers to conduct their undertaking so that people who are not their employees, including contractors, are not exposed to risks to their health and safety, so far as is reasonably practicable. Contractors, as employers or self-employed people, have the same duties towards others.
Management of Health and Safety at Work Regulations 1999. Employers must assess risks, and where employers share a workplace they must co-operate and co-ordinate their arrangements. Host employers must give visiting workers information about the risks and the measures in place.
Construction (Design and Management) Regulations 2015. For construction work, CDM sets specific duties for clients, designers and contractors, including appointing a principal designer and principal contractor where more than one contractor is involved.
Industry-specific law. Sites handling dangerous substances, such as petrol forecourts, must also meet DSEAR. Quarries have their own regulations.
The common thread: using a contractor does not transfer your duties. You must take reasonable steps to make sure the work is done safely.
The five stages of contractor management
HSE's guidance on using contractors describes a simple sequence. Most site systems follow it.
1. Plan the work
Define the job, where it will happen and what it involves. Identify the hazards, including those your site creates for the contractor (vehicles, hazardous areas, live systems) and those the contractor's work creates for you (hot work, dust, noise, isolations). Decide what controls the job will need.
2. Choose a competent contractor
Ask for evidence that the contractor can do the work safely: relevant experience, qualifications, safety policies and records, insurance, and the training of the people who will actually do the job. This is where safety passports help. If your sites require a passport, you can check each worker holds it rather than assessing everyone's training from scratch.
3. Agree how the risks will be controlled
The contractor should provide a risk assessment and method statement for the job. You agree the controls, including any permit to work, isolations, barriers and supervision, and give the contractor the site information they need.
4. Manage and supervise the work
Induct the contractor on site. Check passports and credentials on arrival. Issue permits where needed. Monitor the work, and stop it if it departs from what was agreed or conditions change. The level of supervision should match the risk.
5. Review the work
When the job is finished, check it was completed safely and to standard, close out permits, and record any problems. Feed what you learn into how you plan and choose contractors next time.
Where safety passports fit
A safety passport gives you a quick, reliable answer to one question: has this person had recognised health and safety awareness training for this industry?
| Stage | How a passport helps |
|---|---|
| Choosing a contractor | Set the passport as a minimum requirement in your contractor conditions |
| Agreeing controls | Assume a common baseline of knowledge when planning inductions and briefings |
| Managing the work | Check the card at the gate in seconds: photo, sector, expiry date |
| Reviewing | Use passport records to show who was on site and what training they held |
HSE describes passport schemes as a useful way for employers to check that someone has received basic health and safety awareness training. It is equally clear that a passport is not an assurance of competence, nor a substitute for site-specific information or supervision. Use the passport for the baseline, and the rest of your system for everything else. Read more in what HSE says about passport schemes.
A simple contractor management checklist
- The job is defined and its hazards identified
- The contractor's competence has been checked for this type of work
- Every worker holds the passport your sites require, in date, for the right sector
- A risk assessment and method statement have been received and agreed
- Permits are in place for higher-risk work
- The contractor has had a site induction covering local hazards, rules and emergencies
- Supervision matches the risk of the job
- The work area is separated from staff, the public and other contractors where needed
- Permits are closed and the work reviewed at the end
Common contractor management failures
Checking the company, not the people. A contractor's paperwork can be excellent while the individuals who turn up are untrained. Check the people at the gate.
Inductions that teach the basics to everyone. Without a passport requirement, inductions become long, repetitive and inconsistent. With one, they can be short and focused on your site.
Paperwork without conversation. Method statements and permits only work if they are read, discussed and followed.
No review. If nobody looks back at how jobs went, the same problems recur.
Contractor management on smaller sites
You do not need a large team or specialist software to manage contractors well. On a small site, a few habits cover most of it:
- Keep an approved list of contractors you have checked, with their insurance and key training.
- Ask for the paperwork before the visit, not on the day: risk assessment, method statement and passport details.
- Use one sign-in point where cards are checked and the induction is given.
- Name a person who is responsible for each contractor while they are on site.
- Spend two minutes at the end checking the work area and asking how the job went.
How to tell whether it is working
Measure a handful of things and review them every few months:
| Measure | What it tells you |
|---|---|
| Percentage of contractors arriving with an in-date passport | Whether your requirement is understood across your supply chain |
| Contractors turned away and why | Where communication or planning is failing |
| Permits issued, and permits found not followed | Whether the permit system is being used properly |
| Near misses and incidents involving contractors | Where controls need strengthening |
| Average induction time | Whether inductions are focused on the site, not repeating the basics |
Share the results with your regular contractors. The best contractor relationships improve because both sides can see the same numbers.
Contractor management on passport-controlled sites
Several industries have built contractor management around a shared passport. Forecourt operators ask contractors for the SPA Petrol Retail passport, food manufacturers for the Food and Drink passport, and quarry operators for the MPQC/SPA passport. Because the whole supply chain holds the same card, every site in the sector can rely on the same baseline.
The results can be measurable. Leicester City Council reported a 32 per cent fall in accident rates over the three years after it introduced a passport for its housing maintenance teams, and Metronet reported a 75 per cent reduction in accident statistics within 18 months on its underground stations programme. Our employer guide explains how to introduce a passport requirement.
Frequently asked questions
What is contractor management in health and safety?
It is the process of planning work, choosing competent contractors, agreeing risk controls, supervising the work and reviewing it, so that contractors work safely on your premises or on your behalf.
Who is responsible for contractor safety?
Both the client and the contractor. The client must take reasonable steps to make sure work is done safely, and the contractor must manage the risks of its own work. Neither can pass its duties entirely to the other.
Do contractors need a site induction if they hold a safety passport?
Yes. A passport covers general awareness for the industry. The induction covers your site's specific hazards, rules and emergency arrangements.
What should I ask a contractor for before they start?
Evidence of competence, insurance, a risk assessment and method statement for the job, and proof that each worker holds the training your site requires, such as a safety passport.
Is contractor management software necessary?
Not always. Small sites can manage with clear procedures and good records. Larger operations often use software to track credentials and expiry dates, but the principles are the same.


