On this page
A CCNSG Safety Passport is a two-day health and safety awareness course and card for engineering construction and process industry sites: refineries, power stations, chemical plants and similar. It is administered by the ECITB on behalf of the Client/Contractor National Safety Group. The card lasts three years. Since 7 September 2026 you can renew at any point before it expires, with a one-day course or a test-only option, and a renewed card runs for 39 months from the renewal assessment. If it expires, you sit the full two-day course again.
What CCNSG stands for
CCNSG is the Client/Contractor National Safety Group, a steering group of major clients and contractors in engineering construction. The group sets the standard for the passport, and the ECITB (Engineering Construction Industry Training Board) administers the scheme and approves the training providers who deliver it.
The idea is the same as any safety passport. Contractors move between sites run by different clients. Rather than every client running its own basic safety course, the industry agrees one standard course, the contractor trains once, and every client in the scheme accepts the card. Site-specific inductions still happen on top.
Who needs a CCNSG safety passport?
You need one if the sites you work on ask for it. In practice that means engineering construction and the process industries, including:
- oil refineries and fuel terminals
- power stations and energy from waste plants
- chemical, pharmaceutical and petrochemical plants
- major shutdown and maintenance projects on these sites
Electricians, mechanical fitters, scaffolders, painters, insulation contractors, inspectors and labourers working on these sites are all commonly asked for it.
It is not a general-purpose card. Petrol forecourts, food and drink factories and quarries have their own passports, and a CCNSG card is not usually accepted in their place. Our guide to SPA and CCNSG compares the two side by side.
What the course covers
The CCNSG national course runs over two days with an approved provider. It is an awareness course, written for people new to these sites as well as experienced workers. The syllabus covers the ground you would expect on a major hazard site:
- health and safety law and personal responsibilities on site
- hazards of process plant, including working at height, confined spaces and excavations
- permits to work and isolations
- tools, equipment and lifting operations
- health risks such as hazardous substances, noise and manual handling
- emergency procedures and environmental protection
There is a written assessment at the end. Check the delivery method with your provider: some run the course in a classroom only, others also offer remote dates.
How long a CCNSG card lasts
A card from the two-day national course is valid for three years.
The renewal rules changed on 7 September 2026. Before then, renewing early could carry up to six months of unused time onto the new card. The ECITB has removed that. Now:
- you can renew at any point before your card expires
- a renewed card is valid for 39 months, three years and three months, from the date of the renewal assessment
- no unused time carries forward, so there is no advantage in renewing very early
In practice, plan to renew in the last few months before expiry. The extra three months on a renewed card gives you room to renew comfortably before the next deadline without losing much time.
Renewing a CCNSG safety passport
There are two ways to renew, both through an ECITB approved training provider:
| Route | What it involves | Best for |
|---|---|---|
| One-day renewal course | A refresher day with a trainer, followed by the renewal assessment | Anyone who wants the refresher, or has not worked on these sites for a while |
| Test-only renewal | 60 multiple-choice questions at a provider's centre. The pass mark is 48 (80 per cent). You get two attempts before you must attend the one-day course | Experienced cardholders who are confident with the content |
The renewal assessment covers health and safety law, tools and equipment, emergency procedures and your responsibilities on site.
What happens if your card expires
If your card runs out before you renew, the ECITB requires you to complete the full two-day national course again. The renewal course and test-only option are no longer open to you.
There are limited exceptions for genuine hardship, such as a medical condition or an overseas assignment that made renewal impossible. These need authorisation through your training provider and the ECITB, so raise them before you book.
The simplest protection is a reminder in your calendar a few months before the expiry date printed on the card.
Booking safely
The ECITB has warned cardholders about third-party websites that resell CCNSG courses with added booking fees, and do not always book people onto the right course. Two simple checks avoid that:
- book directly with an ECITB approved training provider, using the ECITB's own find a training provider and find a course tools
- confirm whether you need the two-day national course or a renewal before you pay, by checking the expiry date on your current card
Providers set their own prices, so it is worth comparing a few approved providers near you.
CCNSG and other safety passports
Many contractors work across more than one industry, and each industry has its own standard:
- Engineering construction and process plants: CCNSG
- Petrol forecourts and fuel storage: the SPA Petrol Retail passport
- Food and drink manufacturing: the SPA Food and Drink passport
- Quarries, asphalt and concrete plants: the MPQC/SPA Quarry Safety Passport
- Labouring on building sites: a CSCS Labourer card
A CCNSG card does not count towards these automatically, and they do not count towards CCNSG. A contractor who services forecourt equipment and also works on refinery shutdowns will typically hold both CCNSG and SPA Petrol Retail. If you are not sure, see which health and safety card you need.
For employers
If you run process sites, CCNSG is the standard your engineering construction supply chain will already hold, so specifying it keeps entry simple. Write the requirement into your contractor conditions, check the expiry date at the gate and keep a record. HSE's view is that a passport shows basic awareness, not competence for a specific task, so your own induction and task-specific checks still apply. Our guide to contractor management covers the rest of the process.
Frequently asked questions
Who runs the CCNSG safety passport?
The scheme is controlled by the Client/Contractor National Safety Group, a steering group of major clients and contractors in engineering construction. The ECITB administers it and approves the training providers who deliver it.
How long is a CCNSG safety passport valid?
Three years from the two-day national course. Since 7 September 2026, a renewed card is valid for 39 months from the date of the renewal assessment.
Can I renew a CCNSG passport early?
Yes. You can renew at any point before the card expires. Unused time no longer carries over, so most people renew in the last few months before expiry.
What happens if my CCNSG card has expired?
You need to complete the full two-day national course again. Limited exceptions for genuine hardship, such as illness or an overseas posting, need authorisation through your provider and the ECITB.
Is there a test-only CCNSG renewal?
Yes. The renewal test has 60 multiple-choice questions with a pass mark of 48 (80 per cent). You get two attempts before you must attend the one-day renewal course.
Can I use a CCNSG passport on a petrol forecourt?
Usually not. Forecourt operators in the SPA scheme ask for the SPA Petrol Retail passport, which covers forecourt hazards such as fuel properties, hazardous zones and delivery hazards.


