Engineering worker suffers life changing injuries

Engineering worker suffers life changing injuries

12 July 2016

Engineering firm, Point Engineering (Hull) Ltd was sentenced today for safety breaches after a marine hatch and frame weighting more than 500 kilograms fell forward seriously injuring an employee and narrowly missing another person.

The injured person was preparing the marine hatch for inspection and used a sling and overhead crane to move it to a vertical position so that the hinge could be stamped with an approval mark by a surveyor who was with him.

The marine door fell onto Richard Blake, 63, a welder and fabricator at the company, trapping his pelvis and legs, the surveyor, who was approximately one metre away from him narrowly escaped injury when the hatch and frame grazed the toe of his safety boot.

Mr Blake, suffered a shattered pelvis and broken hip when the accident happened in February 2014. The Health and Safety Executive (HSE) prosecuted the firm over the incident.

Point Engineering (Hull) Ltd of Lee Smith Street, Hull, pleaded guilty to breaching Regulation 3(1)(a) of the Management of Health and Safety at Work Regulations 1999, and was fined £30,000 with £24,577 costs at Hull Crown Court.

After the hearing, HSE inspector Sarah Lee commented: “If the job had been correctly planned and risk assessed then a safe way of doing the job could have been established.Sadly it was not, which lead to Mr Blake suffering from these terrible injuries.”

Notes to Editors:

  1. The Health and Safety Executive (HSE) is Britain’s national regulator for workplace health and safety. It aims to reduce work-related death, injury and ill health. It does so through research, information and advice, promoting training; new or revised regulations and codes of practice, and working with local authority partners by inspection, investigation and enforcement.[1]
  2. More about the legislation referred to in this case can be found at: link to external website[2]
  3. HSE news releases are available at